Guide to Assembling Your Lawn Mower

1. Opening the Box.

Start by opening the box. Inside you will find the mower and the grass catcher basket. Take both out carefully and place them on a flat surface.

2. Remove the Protective Film.

Your mower will be wrapped in a protective film for transport. Remove it gently to avoid damaging the parts.

3. Opening and Securing the Mower Screws.

Once you have removed the mower from the box, open it according to the instructions provided. Fasten all necessary screws to ensure stability and safety during use.

4. Fixing the Starter Rope

The starter rope is essential for starting the mower. Make sure it is securely fastened and easily accessible.

5. Applying the Ties

Tie-downs are important for keeping moving parts in place. Follow the instructions to apply them correctly.

6. Assembling the Grass Catcher Basket.

It is time to assemble the grass catcher basket. Assemble it following the instructions, making sure it attaches properly to the mower.

7. Pouring 500 ml of Oil

Before starting the mower, it is essential to pour the oil into the engine. Carefully measure 500 ml of oil and pour it into the oil reservoir.

8. Refilling Gasoline

After the oil, it is time to add gasoline. Fill the tank with the recommended amount of gasoline, being careful not to pour too much.

9. Preparation for Starting

Now that the mower is assembled and refueled, it is almost ready to be started. Check that all parts are assembled correctly and that there are no obstacles around.